Electronic component housing

Electronic component housings are often used in many different industries. They provide a space for an electronic device to be safely stored and protected from the environment. This kind of housing is made out of 6061-T6 aluminum, which has been black anodized and sandblasted to create a durable, long-lasting exterior.

From the picture, you can see some blank areas both on the outside and inside. That’s the most difficult part of this process which is removing the anodizing layer so that it can be conductive. Why it’s the most difficult part?  Because the anodizing layer has been dyed by a chemical process. So, it’s difficult to take out with conventional methods. We have to remove it by CNC machine which means products will be fixed on the machine again. So we usually set some allowance for removing work. Workers must take care of coordinates to make sure that the housing will be cut precisely at the required positions, or removing fewer or extra layers will happen. We also remove anodizing layer by laser, it’s safer and faster, but the limit is laser can just remove the layer on a flat plate. Like this product.

Removing anodizing layer is common for an electronic enclosure,  so this kind of process is not new to us. We have certain experience in removing anodized layers while maintaining accuracy and quality standards.

FAQ

Q1.Are you a machine shop or a trading company?
We are a professional CNC machine shop with more than 25 years’ machiningexperience, located in Kunshan, China.

Q2.How can I get a quote?
Please provide us with such 3D files as IGES,STEP, X_T and CAD files as DXF , DWG together with detailed PDF, and we promise that your designs will remain private.Please specify if you have any requirements.

Q3. Can I get a quote if we have no drawings?
Samples and drawings are available.

Q4. How long will it take to make the sample?
1-3 days for sample orders

Q5. How to control quality?
(1)Raw material inspection- Using spectrum detection for raw material to ensure real material, and material inspection report is available.
(2)Production first inspection-Ensuring the critical dimensions in mass production.
(3)Pre-shipment inspection-100% inspected by QC department before shipment and each product is included with inspection report.

Q6.What will you do if we get poor quality parts?
Please show us the pictures, and we will find the solutions.