When you make a surface finish on plastic composites can vary a great deal, depending on the physical and chemical properties of the polymer blend as well as the parameters of the injection molding process. The first objective for a custom injection molder is working with the customer to determine how important the surface finish is for the appearance and/or performance of the final product. For example, does the product need to be eye-catching or simply functional? Depending on the answer, the material selected and the desired finish will determine the settings for the injection molding process, and any required secondary finishing operations.

3D printing technology is very popular to using in different industries,it also called additive manufacturing. This term accurately describes how this technology works to create objects. “Additive” refers to the successive addition of thin layers between 16 to 180 microns or more to create an object. In fact, all 3D printing technologies are similar, as they construct an object layer by layer to create complex shapes.

Whether it’s your first time working with injection molding or your first time rethinking your injection mold tooling material, it’s always good to consider different options to understand how they can impact your overall production. We will enlighten you with the pros and cons of working with the two most used materials here at Jaycon Systems: P20 steel and aluminum. We will outline why each is best for their intended purposes.

Plastic products can be seen everywhere in life, usually after processing injection molding and assembly, injection molding processing is the main method is one of the plastic products made in sound field, three of the most basic step is indispensable to the process of completion, respectively is the product design, mold design and manufacturing process, this is the three elements of injection molding processing. So what kind of method can promote the better completion of the work of these links?

In recent years, with the rapid development of China's industry, the development of the plastic mold industry has been greatly promoted. At present, domestic plastic mold manufacturers are developing in a large-scale and high-level direction due to large investment in technology reform and high starting point.

Looking for the “most important” parameter may be futile. But one thing is certain: Your people are your most important resource—more important than the equipment. (Photo: Prism Plastics)

A high-end precision die-casting mold is like a high-end car. It needs hundreds of thousands of movements. It needs to be well maintained and used to improve its service life. Therefore, regular maintenance is especially important. First of all, the

Blow molding is widely used to inflate a hot parison that is closed in a mold into a hollow product by gas pressure, or a method in which a tube parison is inflated into a tube film. This method is mainly used in the manufacture of various packaging containers and tubular membranes.

1. Reasonably use the cooling lubricating fluid to play the three functions of cooling, washing and lubrication, keep the cooling and lubrication clean, and control the grinding heat within the allowable range to prevent the workpiece from being thermally deformed. Improve the cooling conditions during grinding, such as the use of oil-impregnated grinding wheels or internal cooling wheels. The cutting fluid is introduced into the center of the grinding wheel, and the cutting fluid can directly enter the grinding zone to exert an effective cooling effect to prevent burns on the surface of the workpiece.

1. Select the casting material. The quality of the material directly affects the quality of the injection mold. It is very important to choose a material with good performance and good heat resistance. In this case, the product produced is good.

There is no shame in hard working. These 2 pictures were taken during our workers were hard working. Even they were not tidy,but we know they just focused on their jobs. Making injection molding is not easy work,making injection molding is not a clea

Limit the concept risk: made out of aluminum or soft metal alloy, the concept risk is greatly lowered. This material is indeed easier to machine than metal and the mold will not include all the functionalities of the first series. This makes it simpler and easier to make adjustments and modifications on the cavities if necessary. During the prototyping stage and for the production of pilot and transition series, this greater flexibility is a huge advantage.